DataSheet.in

AT24C16D डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - I2C-Compatible (2-Wire) Serial EEPROM - ATMEL Corporation

भाग संख्या AT24C16D
समारोह I2C-Compatible (2-Wire) Serial EEPROM
मैन्युफैक्चरर्स ATMEL Corporation 
लोगो ATMEL Corporation लोगो 
पूर्व दर्शन
1 Page
		
<?=AT24C16D?> डेटा पत्रक पीडीएफ

AT24C16D pdf
1. Pin Descriptions and Pinouts
Table 1-1. Pin Descriptions
Pin
Number
1, 2, 3
4
5
6
7
8
Pin
Symbol
NC
GND
SDA
SCL
WP
VCC
Pin Name and Functional Description
No Connect: The NC pins are not bonded to a die pad. These pins can be
connected to GND or left floating.
Ground: The ground reference for the power supply. GND should be
connected to the system ground.
Serial Data: The SDA pin is an open-drain bidirectional input/output pin
used to serially transfer data to and from the device.
The SDA pin must be pulled-high using an external pull-up resistor (not to
exceed 10Kin value) and may be wire-ORed with any number of other
open-drain or open-collector pins from other devices on the same bus.
Serial Clock: The SCL pin is used to provide a clock to the device and to
control the flow of data to and from the device. Command and input data
present on the SDA pin is always latched in on the rising edge of SCL, while
output data on the SDA pin is clocked out on the falling edge of SCL.
The SCL pin must either be forced high when the serial bus is idle or
pulled-high using an external pull-up resistor.
Write Protect: Connecting the WP pin to GND will ensure normal Write
operations. When the WP pin is connected to VCC, all write operations to the
memory are inhibited.
Refer to Note 1 for the behavior of the pin when not connected.
Device Power Supply: The VCC pin is used to supply the source voltage to
the device. Operations at invalid VCC voltages may produce spurious results
and should not be attempted.
Asserted
State
High
Pin
Type
Power
Input/
Output
Input
Input
Power
Note:
1. If the WP pin is not driven, it is internally pulled down to GND. In order to operate in a wide variety of
application environments, the pull-down mechanism is intentionally designed to be somewhat strong. Once
these pins are biased above the CMOS input buffer’s trip point (~0.5 x VCC), the pull-down mechanism
disengages. Atmel recommends connecting these pins to a known state whenever possible.
8-lead SOIC
8-lead TSSOP
8-pad UDFN
8-lead PDIP
NC
NC
NC
GND
18
27
36
45
Top View
VCC
WP
SCL
SDA
NC
NC
NC
GND
18
27
36
45
Top View
VCC
WP
SCL
SDA
NC 1
NC 2
NC 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
Top View
NC
NC
NC
GND
1
2
3
4
8 VCC
7 WP
6 SCL
5 SDA
Top View
(1)
5-lead SOT23
8-ball VFBGA
(1)
4-ball WLCSP
SCL
GND
15
2
WP
SDA
34
VCC
Top View
NC
NC
NC
GND
1
2
3
4
8 VCC
7 WP
6 SCL
5 SDA
Top View
VCC GND
SCL SDA
Top View
Note: Package drawings are not to scale.
Note: 1. Refer to “Device Addressing” for details about addressing the SOT23 and WLCSP version of the device.
2 AT24C16D [DATASHEET]
Atmel-8906C-SEEPROM-AT24C16D-Datasheet_052015

विन्यास 27 पेज
डाउनलोड[ AT24C16D Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
AT24C162-Wire Serial EEPROMATMEL Corporation
ATMEL Corporation
AT24C1642-Wire Serial EEPROMATMEL Corporation
ATMEL Corporation


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English