DataSheet.in

DN515 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - SUBMINIATURE PROPORTIONALLY CONTROLLED HEATER - ThermOptics

भाग संख्या DN515
समारोह SUBMINIATURE PROPORTIONALLY CONTROLLED HEATER
मैन्युफैक्चरर्स ThermOptics 
लोगो ThermOptics लोगो 
पूर्व दर्शन
1 Page
		
<?=DN515?> डेटा पत्रक पीडीएफ

DN515 pdf
DN515
Heater Temperature (TC) vs.
TemperatureSet Resistor (RS)
T RS T RS T
°C K" °C K" °C
0 360.1 29 79.6 58
1 340.6 30 75.8 59
2 322.3 31 72.2 60
3 305.0 32 68.8 61
4 288.7 33 65.5 62
5 273.4 34 62.5 63
6 259.0 35 59.5 64
7 245.4 36 56.8 65
8 232.5 37 54.1 66
9 220.4 38 51.6 67
10 209.0 39 49.2 68
11 198.3 40 46.9 69
12 188.1 41 44.8 70
13 178.5 42 42.7 71
14 169.4 43 40.7 72
15 160.8 44 38.9 73
16 152.7 45 37.1 74
17 145.1 46 35.4 75
18 137.8 47 33.8 76
19 131.0 48 32.3 77
20 124.5 49 30.8 78
21 118.3 50 29.4 79
22 112.5 51 28.1 80
23 107.0 52 26.8 81
24 101.8 53 25.5 82
25 96.9 54 24.4 83
26 92.2 55 23.2 84
27 87.8 56 22.2 85
28 83.6 57 21.2 86
RS T RS
K" °C K"
20.2 87 4.6
19.3 88 4.4
18.4 89 4.1
17.5 90 3.9
16.7 91 3.6
15.9 92 3.4
15.2 93 3.2
14.5 94 3.0
13.8 95 2.8
13.2 96 2.6
12.5 97 2.4
11.9 98 2.2
11.4 99 2.0
10.8 100 1.80
10.3 101 1.68
9.8 102 1.52
9.3 103 1.37
8.9 104 1.23
8.4 105 1.09
8.0 106 0.95
7.6 107 0.82
7.2 108 0.70
6.8 109 0.58
6.5 110 0.46
6.1 111 0.35
5.8 112 0.25
5.5 113 0.14
5.2 114 0.04
4.9
Typical Base Temperature Change
vs. Power Dissipation
0
-4
-8
- 12
Max. Start-up Current
vs. Supply Voltage
1.6
1.2
0.8
0.4
Max. Heater Power Available
vs. Supply Voltage
40
30
20
10
0
0 10 20 30 40
Supply Voltage (Volts D.C.)
0
0 10 20 30 40
Supply Voltage (Volts D.C.)
PIN 1
0.094"
2
MECHANICAL DIMENSIONS
DAWN
DN515
DATE CODE
4
0.250"
3
0.018 DIA. PIN
OFHC GRADE
COPPER
1/2 HARD .00003"
GOLD FLASH
0.750"
0.600"
0.500"
0.400"
0.200"
0.310"
0.180"
0.070"
Mounting the DN515 Heater
- 16
0
10 20 30 40
Heater Power (Watts)
#43 DRILL
O.O89" DIA.
CLEARANCE
HOLES.
0.650"
NOTES:
1. Optimum heat transfer between
Mounting Tips
the DN515 and the device
1. Make sure that the surface of the
being heated, occurs when a thermal device that the heater is mounted to
compound, such as Dow Corning 340, is flat.
is applied to the mounting surface of 2. Make sure that the surface of the
the heater.
heater and devices being heated is
2. All DN515 heaters are tested for
clean. Any particles between the
gross leaks with 3M™ FC-40
surfaces will cause poor heat transfer
Fluorinert™ at 125°C.
and can cause potential breakage of
3. Special enviromental testing is
the heater substrate.
available on request.
3. Tighten screws to one inch pound of
torque. Alternate tighting of screws to
guarantee that the heater is flat.
2-56 SCREW
2-56 NUT
Completed Assembly
Fiber Washer
DWG. 100042
Thermal compound
such as Dow Corning
340 is uniformally
dispensed between the
heater and the device
being heated.
Device being
heated
Tighten screws to
one inch pound of
torque.
ThermOptics® 12-2011
1004 Mallory Way • Carson City, NV 89701 • Ph (775) 882-7721 • Fax (775) 882-7675 • http:www.thermoptics.com

विन्यास 2 पेज
डाउनलोड[ DN515 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
DN511SUBMINIATURE PROPORTIONALLY CONTROLLED HEATERETC
ETC
DN515SUBMINIATURE PROPORTIONALLY CONTROLLED HEATERThermOptics
ThermOptics


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English