DataSheet.in

7805ALP डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - 16-Bit Latchup Protected ADC - Maxwell Technologies

भाग संख्या 7805ALP
समारोह 16-Bit Latchup Protected ADC
मैन्युफैक्चरर्स Maxwell Technologies 
लोगो Maxwell Technologies लोगो 
पूर्व दर्शन
1 Page
		
<?=7805ALP?> डेटा पत्रक पीडीएफ

7805ALP pdf
www.DataSheet.co.kr
16-Bit Latchup Protected ADC
7805ALP
PIN NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
NAME
VIN
AGND1
REF
CAP
AGND2
D15 (MSB)
D14
D13
D12
D11
D10
D9
D8
DGND
D7
D6
D5
D4
D3
D2
D1
D0 (LSB)
STATUS*
R/C
CS
BUSY
DECPLNG
VS
TABLE 1. 7805ALP PINOUT DESCRIPTION
DIGITAL I/O DESCRIPTION
Analog input.
Analog ground. Used internally as ground reference point.
Reference input/output. 2.2 µ F tantalum capacitor to ground
Reference buffer capacitor. 2.2 µ F tantalum capacitor to ground.
Analog ground.
0 Data bit 15. Most Significant Bit (MSB) of conversion results. When STATUS is
HIGH*, D15 must not be driven high.
0 Data bit 14. When STATUS is HIGH*, D14 must not be driven high.
0 Data bit 13. When STATUS is HIGH*, D13 must not be driven high.
0 Data bit 12. When STATUS is HIGH*, D12 must not be driven high.
0 Data bit 11. When STATUS is HIGH*, D11 must not be driven high.
0 Data bit 10. When STATUS is HIGH*, D10 must not be driven high.
0 Data bit 9. When STATUS is HIGH*, D9 must not be driven high.
0 Data bit 8. When STATUS is HIGH*, D8 must not be driven high.
Digital Ground
0 Data bit 7. When STATUS is HIGH*, D7 must not be driven high.
0 Data bit 6. When STATUS is HIGH*, D6 must not be driven high.
0 Data bit 5. When STATUS is HIGH*, D5 must not be driven high.
0 Data bit 4. When STATUS is HIGH*, D4 must not be driven high.
0 Data bit 3. When STATUS is HIGH*, D3 must not be driven high.
0 Data bit 2. When STATUS is HIGH*, D2 must not be driven high.
0 Data bit 1. When STATUS is HIGH*, D1 must not be driven high.
0 Data bit 0. Least Significant Bit (LSB) of conversion results. When STATUS is
HIGH*, D0 must not be driven high.
0 STATUS when HIGH indicates latchup protection is active and output data is
invalid. Capacitive loading should not exceed 1000 pF.
I With CS LOW and BUSY HIGH, a falling edge of R/C initiates a new conversion.
When STATUS is HIGH*, CS and R/C must not be driven high.
I Internally OR’d with R/C. If R/C LOW, a falling edge on CS initiates a new conver-
sion. When STATUS is HIGH*, CS and R/C must not be driven high.
0 At the start of a conversion, BUSY goes LOW and stays LOW until the conversion
is completed and the digital outputs have been updated.
Supply voltage high speed decoupling pin. Decouple to ground with 1.0 µ F ceramic
capacitor.
Supply input. Nominally 5V. Decouple to ground with 10 µ F tantalum capacitor.
01.10.05 Rev 9
All data sheets are subject to change without notice 2
©2005 Maxwell Technologies
All rights reserved.
Datasheet pdf - http://www.DataSheet4U.net/

विन्यास 18 पेज
डाउनलोड[ 7805ALP Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
7805ALP16-Bit Latchup Protected ADCMaxwell Technologies
Maxwell Technologies


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English