DataSheet.in

IDT74FCT20807 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - 2.5V CMOS 1-TO-10 CLOCK DRIVER - Integrated Device Technology

भाग संख्या IDT74FCT20807
समारोह 2.5V CMOS 1-TO-10 CLOCK DRIVER
मैन्युफैक्चरर्स Integrated Device Technology 
लोगो Integrated Device Technology लोगो 
पूर्व दर्शन
1 Page
		
<?=IDT74FCT20807?> डेटा पत्रक पीडीएफ

IDT74FCT20807 pdf
IDT74FCT20807
2.5V CMOS 1-TO-10 CLOCK DRIVER
ABSOLUTE MAXIMUM RATINGS(1)
Symbol Description
Max Unit
VTERM(2) Terminal Voltage with Respect to GND –0.5 to +4.6
V
VTERM(3) Terminal Voltage with Respect to GND –0.5 to +5.5
V
VTERM(4) Terminal Voltage with Respect to GND –0.5 to VCC+0.5 V
TSTG StorageTemperature
–65 to +150 °C
IOUT DC Output Current
–60 to +60 mA
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminals.
3. Input terminals.
4. Outputs and I/O terminals.
INDUSTRIAL TEMPERATURE RANGE
www.DataSheet4U.com
CAPACITANCE (TA = +25OC, f = 1.0MHz)
Symbol Parameter(1)
Conditions Typ. Max. Unit
CIN
Input Capacitance
VIN = 0V
3
4 pF
NOTE:
1. This parameter is measured at characterization but not tested.
PIN DESCRIPTION
Pin Names
Description
I N Clock Inputs
O x Clock Outputs
POWER SUPPLY CHARACTERISTICS
Symbol
ICCL
ICCH
ICC
ICCD
IC
Parameter
Quiescent Power Supply Current
TTL Inputs HIGH
Power Supply Current per
Input HIGH
Dynamic Power Supply Current
perOutput(3)
Total Power Supply Current(4)
Test Conditions(1)
VCC = Max.
VIN = GND or VCC
VCC = Max.
VIN = VCC –0.6V
VCC = 2.7V
15 pF
VCC = Max.
CL = 12pF
All outputs toggling
fi = 150MHz
150 MHz
VIN = VCC
VIN = GND
VIN = VCC –0.6V
VIN = GND
Min.
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 2.5V, +25°C ambient.
3. This parameter is not directly testable, but is derived for use in Total Power Supply calculations.
4. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ICC DHNT + ICCD (fi)
ICC = Quiescent Current (ICCL, ICCH and ICCZ)
ICC = Power Supply Current for a TTL High Input (VIN = VCC -0.6V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fi = Input Frequency
Typ.(2)
0.1
Max.
20
45 300
40 —
65 90
75 100
Unit
µA
µA
µA
/MHz
mA
2

विन्यास 6 पेज
डाउनलोड[ IDT74FCT20807 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
IDT74FCT208072.5V CMOS 1-TO-10 CLOCK DRIVERIntegrated Device Technology
Integrated Device Technology


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English