DataSheet.in

TDA8042M डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - Quadrature demodulator - NXP

भाग संख्या TDA8042M
समारोह Quadrature demodulator
मैन्युफैक्चरर्स NXP 
लोगो NXP लोगो 
पूर्व दर्शन
1 Page
		
<?=TDA8042M?> डेटा पत्रक पीडीएफ

TDA8042M pdf
Philips Semiconductors
Quadrature demodulator
Product specification
TDA8042M
FEATURES
5 V supply voltage
Internal voltage reference
350 to 650 MHz input frequency range
On-chip 0° and 90° phase shifter
Symbol rate up to 45 Msymbols/s
High input sensitivity
Built-in voltage stabilizer
AGC amplifier with 21 dB control range
AGC detector.
APPLICATION
Binary Phase-Shift Keying (BPSK) and Quadrature
Phase-Shift Keying (QPSK) demodulation.
GENERAL DESCRIPTION
The TDA8042M is a monolitic bipolar IC dedicated for
BPSK and QPSK demodulation. It is designed to be used
together with the TDA8043 as part of a complete
BPSK/QPSK satellite demodulator and decoder.
The bandwidth of the TDA8042M allows symbol rates up
to 45 Msymbols/s. It includes two matched mixers, an IF
gain controlled amplifier, a symmetrical oscillator, a 0°/90°
phase shifter, two low-pass filters and two matched
baseband amplifiers.
The high input sensitivity makes interfacing with various
sources easy. The input sensitivity can be adjusted by
means of an internal AGC amplifier.
The oscillator operates at half the IF frequency. The local
oscillator signal driving the mixers is made by doubling the
oscillator frequency by an internal frequency multiplier.
The oscillator frequency can be set by the appropriate
external LC tank circuit. The internal wideband phase
shifter provides two oscillator signals which are
90 degrees out of phase to drive the mixers.
An AGC detector at the I and Q outputs makes it possible
to keep the I and Q signals at a constant level to drive the
analog-to-digital converters of the TDA8043.
QUICK REFERENCE DATA
SYMBOL
VCC
ICC
Vi(RF)
fi(RF)
VolQ(p-p)
EΦ(I-Q)
EG(I-Q)
Gtilt
PARAMETER
supply voltage
supply current
operating input level
RF input signal frequency
I and Q output voltage (peak-to-peak value)
phase matching error between I and Q channels
gain matching error between I and Q channels
gain tilt error between I and Q channels
CONDITIONS MIN.
4.75
VCC = 5.0 V
54
350
TYP.
5.0
67.5
57
0.8
0.7
0.15
0.3
MAX.
5.25
81
650
2
0.8
0.5
UNIT
V
mA
dBµV
MHz
V
deg
dB
dB
ORDERING INFORMATION
TYPE
NUMBER
TDA8042M
NAME
SSOP20
PACKAGE
DESCRIPTION
plastic shrink small outline package; 20 leads; body width 4.4 mm
VERSION
SOT266-1
1997 Apr 11
2

विन्यास 16 पेज
डाउनलोड[ TDA8042M Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
TDA8042MQuadrature demodulatorNXP
NXP


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English