DataSheet.in

AT22LV10 डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - Low-Voltage UV Erasable Programmable Logic Device - ATMEL Corporation

भाग संख्या AT22LV10
समारोह Low-Voltage UV Erasable Programmable Logic Device
मैन्युफैक्चरर्स ATMEL Corporation 
लोगो ATMEL Corporation लोगो 
पूर्व दर्शन
1 Page
		
<?=AT22LV10?> डेटा पत्रक पीडीएफ

AT22LV10 pdf
The AT22LV10L provides the optimum low power CMOS
PLD solution, with low DC power (1 mA typical at VCC =
3.3V) and full CMOS output levels. The AT22LV10L signifi-
cantly reduces total system power, allowing battery pow-
ered operation.
Full CMOS output levels help reduce power in many other
system components.
The AT22LV10 and AT22LV10L logic architectures are
identical to the familiar 22V10. Each output is allocated
from eight to 16 product terms, which allows highly com-
plex logic functions to be realized.
Two additional product terms are included to provide syn-
chronous preset and asynchronous reset. These terms are
common to all ten registers. All registers are automatically
cleared upon power up.
Register preload simplifies testing. A security fuse prevents
unauthorized copying of programmed fuse patterns.
Logic Options
Absolute Maximum Ratings*
Temperature Under Bias ................................ -55°C to +125°C
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground........................................ -2.0V to +7.0V (1)
Voltage on Input Pins
with Respect to Ground
During Programming................................... -2.0V to +14.0V (1)
Programming Voltage with
Respect to Ground...................................... -2.0V to +14.0V (1)
Integrated UV Erase Dose ............................. 7258 Wsec/cm2
*NOTICE:
Stresses beyond those listed under “Absolute Maxi-
mum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional
operation of the device at these or any other condi-
tions beyond those indicated in the operational sec-
tions of this specification is not implied. Exposure to
absolute maximum rating conditions for extended
periods may affect device reliability.
Note:
1. Minimum voltage is -0.6V dc whihc may undershoot
to -2.0V for pulses of less than 20 ns. Maximum pin
voltage is VCC + 0.75V dc which may undershoot to
VCC + 2.0V for pulses of less than 20 ns.
Output Options
DC and AC Operating Conditions
Operating Temperature (Case)
VCC Power Supply
Commercial
0°C - 70°C
3.0V to 5.5V
2 AT22LV10(L)
Industrial
-40°C - 85°C
3.0V to 5.5V

विन्यास 11 पेज
डाउनलोड[ AT22LV10 Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
AT22LV10Low-Voltage UV Erasable Programmable Logic DeviceATMEL Corporation
ATMEL Corporation
AT22LV10LLow-Voltage UV Erasable Programmable Logic DeviceATMEL Corporation
ATMEL Corporation


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English