DataSheet.in

ISL6292C डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - Li-ion/Li Polymer Battery Charger - Intersil

भाग संख्या ISL6292C
समारोह Li-ion/Li Polymer Battery Charger
मैन्युफैक्चरर्स Intersil 
लोगो Intersil लोगो 
पूर्व दर्शन
1 Page
		
<?=ISL6292C?> डेटा पत्रक पीडीएफ

ISL6292C pdf
ISL6292C
Absolute Maximum Ratings
Supply Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 7V
Output Pin Voltage (BAT, VSEN, V2P8). . . . . . . . . . . . . -0.3 to 5.5V
Signal Input Voltage (TIME, IREF). . . . . . . . . . . . . . . . . -0.3 to 3.2V
Output Pin Voltage (STATUS, FAULT) . . . . . . . . . . . . . . . . -0.3 to 7V
Charge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6A
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . .2500V
Machine Model (Per EIAJ ED-4701 Method C-111) . . . . . . . .200V
Thermal Information
Thermal Resistance (Notes 1, 2) . . . . . . . θJA (°C/W) θJC (°C/W)
3x3 DFN Package . . . . . . . . . . . . . .
46
4
Maximum Junction Temperature (Plastic Package) . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300°C
Recommended Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . .-20°C to 70°C
Supply Voltage, VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3V to 6.5V
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
2. θJC, “case temperature” location is at the center of the exposed metal pad on the package underside. See Tech Brief TB379.
Electrical Specifications
Typical values are tested at VIN = 5V and 25°C Ambient Temperature, maximum and minimum values are
guaranteed over 0°C to 70°C Ambient Temperature with a supply voltage in the range of 4.3V to 6.5V, unless
otherwise noted.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNITS
POWER-ON RESET
Rising VIN Threshold
3.0 3.4 3.95 V
Falling VIN Threshold
2.25 2.4 2.65
V
STANDBY CURRENT
VBAT Pin Sink Current
VIN Pin Supply Current
VIN Pin Supply Current
VOLTAGE REGULATION
ISTANDBY
IVIN
IVIN
VIN floating or EN = LOW
VBAT floating and EN pulled low
VBAT floating and EN floating
- - 3.0 µA
- 30 - µA
- 1 - mA
Output Voltage
Dropout Voltage
VCH
VBAT = 3.7V, 0.5A
4.20 4.256 4.30
- 175 -
V
mV
CHARGE CURRENT
Constant Charge Current (Note 3)
Trickle Charge Current
End-of-Charge Threshold
RECHARGE THRESHOLD
ICHARGE
ITRICKLE
IMIN
RIREF = 80k, VBAT = 3.7V
RIREF = 80k, VBAT = 2.0V
RIREF = 80k
0.9 1.0 1.1
A
- 110 - mA
85 110 135 mA
Recharge Voltage Threshold
TRICKLE CHARGE THRESHOLD
VRECHRG
3.90 4.053 4.155
V
Trickle Charge Threshold Voltage
TEMPERATURE MONITORING
VMIN
2.73 2.84 3.04
V
Charge Current Foldback Threshold (Note 4)
Current Foldback Gain (Note 4)
TFOLD
GFOLD
85 100 115 °C
- 100 - mA/°C
2 FN9133.2
July 22, 2005

विन्यास 11 पेज
डाउनलोड[ ISL6292C Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
ISL6292Li-ion/Li Polymer Battery ChargerRenesas
Renesas
ISL6292Li-ion/Li Polymer Battery ChargerIntersil Corporation
Intersil Corporation


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English