DataSheet.in

ICS97ULP845A डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - 1.8V Low-Power Wide-Range Frequency Clock Driver - ICS

भाग संख्या ICS97ULP845A
समारोह 1.8V Low-Power Wide-Range Frequency Clock Driver
मैन्युफैक्चरर्स ICS 
लोगो ICS लोगो 
पूर्व दर्शन
1 Page
		
<?=ICS97ULP845A?> डेटा पत्रक पीडीएफ

ICS97ULP845A pdf
ICS97UL P 8 45A
Pin Descriptions
Terminal
Name
AGND
AVDD
CLK_INT
CLK_INC
FB_INT
FB_INC
FB_OUTT
FB_OUTC
OE
OS
GND
VDDQ
CLKT[0:4]
CLKC[0:4]
NB
Description
Analog Ground
Analog power
Clock input with a (10K-100K Ohm) pulldown resistor
Complentary clock input with a (10K-100K Ohm) pulldown resistor
Feedback clock input
Complementary feedback clock input
Feedback clock output
Complementary feedback clock output
Output Enable (Asynchronous)
Output Select (tied to GND or VDDQ)
Ground
Logic and output power
Clock outputs
Complementary clock outputs
No ball
Electrical
Characteristics
Ground
1.8 V nominal
Differential input
Differential input
Differential input
Differential input
Differential output
Differential output
LVCMOS input
LVCMOS input
Ground
1.8V nominal
Differential outputs
Differential outputs
The PLL clock buffer, ICS97ULP845A, is designed for a VDDQ of 1.8 V, a AVDD of 1.8 V and differential data input and
output levels. Package options include a plastic 28-ball VFBGA.
ICS97ULP845A is a zero delay buffer that distributes a differential clock input pair (CLK_INT, CLK_INC) to five
differential pair of clock outputs (CLKT[0:4], CLKC[0:4]) and one differential pair feedback clock outputs (FB_OUTT,
FBOUTC). The clock outputs are controlled by the input clocks (CLK_INT, CLK_INC), the feedback clocks (FB_INT,
FB_INC), the LVCMOS program pins (OE, OS) and the Analog Power input (AVDD).When OE is low, the outputs (except
FB_OUTT/FB_OUTC) are disabled while the internal PLL continues to maintain its locked-in frequency. OS (Output
Select) is a program pin that must be tied to GND or VDDQ.When OS is high, OE will function as described above.When
OS is low, OE has no effect on CLKT3/CLKC3 (they are free running in addition to FB_OUTT/FB_OUTC).When AVDD
is grounded, the PLL is turned off and bypassed for test purposes.
When both clock signals (CLK_INT, CLK_INC) are logic low, the device will enter a low power mode. An input logic
detection circuit on the differential inputs, independent from the input buffers, will detect the logic low level and perform
a low power state where all outputs, the feedback and the PLL are OFF.When the inputs transition from both being logic
low to being differential signals, the PLL will be turned back on, the inputs and outputs will be enabled and the PLL
will obtain phase lock between the feedback clock pair (FB_INT, FB_INC) and the input clock pair (CLK_INT, CLK_INC)
within the specified stabilization time tSTAB.
The PLL in ICS97ULP845A clock driver uses the input clocks (CLK_INT, CLK_INC) and the feedback clocks (FB_INT,
FB_INC) to provide high-performance, low-skew, low-jitter output differential clocks (CLKT[0:4], CLKC[0:4]).
ICS97ULP845A is also able to track Spread Spectrum Clocking (SSC) for reduced EMI.
1109D—06/19/07
2

विन्यास 12 पेज
डाउनलोड[ ICS97ULP845A Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
ICS97ULP845A1.8V Low-Power Wide-Range Frequency Clock DriverICS
ICS


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English