DataSheet.in

07D101K डेटा पत्रक PDF( Datasheet डाउनलोड )


डेटा पत्रक - METAL OXIDE VARISTORS - HITANO

भाग संख्या 07D101K
समारोह METAL OXIDE VARISTORS
मैन्युफैक्चरर्स HITANO 
लोगो HITANO लोगो 
पूर्व दर्शन
1 Page
		
<?=07D101K?> डेटा पत्रक पीडीएफ

07D101K pdf
METAL OXIDE VARISTORS
Transient voltage surge suppressors
Performance Characteristic
(A) Electrical
Characteristics
Test Methods/Description
Specifications
Environmental conditions under which every measuring is done without
Standard Test Condition doubt on the measuring results. Unless specially specified. Temperature.
Relative humidity are 5 to 35˚C 45 to 85%RH.
The maximum sinusoidal RMS voltage or maximum DC voltage that can
Maximum Allowable Voltage be applied continuously in the specified environmental temperature range.
Varistor Voltage
The voltage between two terminals with the specified measuring current
Cm A DC applied is called Vc or VcmA, the measurement shall be made as
fast as fast as possible to avoid heat affection.
The maximum voltage between two terminals with the specified standard
impulse current (8/20µs) illustrated below applied.
To meet the
specified value.
Clamping Voltage
Peak Current
(Withstanding
Surge Current)
Maximum Energy
The maximum current within the varistor voltage change of ±10% with the
2 times standard impulse current (8/20µs) applied two times with an interval of 5
minutes.
1 times
The maximum current within the varistor voltage change of ±10% the
standard impulse current (8/20µs) applied one time.
The maximum energy within the varistor voltage change of ±10% when
one impulse of 2 ms or 10/1000µS is applied.
Rated Power
The power that can be applied in the specified ambient temperature.
Capacitance
Dissipation Factor
Temperature Confident of
Varistor Voltage
Withstanding Voltage
(Body Insulation)
Capacitance shall be measured at 1 kHz ±10%, 1Vrms max.(1Mhz below
100pF). 0V bias and 20 ±2˚C
Dissipation Factor shall be measured at 1 KHz±10%, 1 Vrms max.(1Mhz +
%10 below 100pF). OV bias and 20 ±2˚C
Vc at 85°C - Vc at 105°C x 1 x100(% / .°C)
Vc at 25°C
60
±0.05%/˚Cmax
The specified voltage shall be applied both terminals of the specimen
connected together and metal foil closely wrapped round its body for 1
minute. Electrical Breakdown shall be examined.
Classification(Nominal varistor voltage) Test Voltage(AC)
No breakdown
VO.1mA. V1mA330V
1000 Vrms
VO.1ma. V1mA > 330V
1500 Vrms
TO BE CONTINUED

विन्यास 4 पेज
डाउनलोड[ 07D101K Datasheet.PDF ]


शेयर लिंक


अनुशंसा डेटापत्रक

भाग संख्याविवरणविनिर्माण
07D101JMETAL OXIDE VARISTORSUNSTART
SUNSTART
07D101KMETAL OXIDE VARISTORSHITANO
HITANO


भाग संख्याविवरणविनिर्माण
30L120CTSchottky RectifierPFC Device
PFC Device
AT28C010-12DKSpace 1-MBit (128K x 8) Paged Parallel EEPROMATMEL
ATMEL
B20NM50FDN-CHANNEL POWER MOSFETSTMicroelectronics
STMicroelectronics
D8442SD844SavantIC
SavantIC
FAE391-A20AM/FM Automotive Electronic TunerMitsumi
Mitsumi


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z



www.DataSheet.in    |   2017   |  संपर्क   |   खोज     |   English